Новости

DCDC Parallel Redundancy Module LIR-20 Supporting for N+1

MORNSUN DCDC Parallel Redundancy Module LIR-20.jpg


Introduction of DC/DC Parallel Redundancy Module LIR-20


In order to solve the power interruption problem caused by circuit abnormality in the actual application, MORNSUN launched the parallel redundancy module LIR-20 to help customers achieve the system redundancy function and improve the overall system reliability.


MORNSUN LIR-20 can be combined with a power supply to build a 1 + 1 and N + 1 parallel redundant system. At the same time, current stress can be reduced. The LIR-20A has the DC OK function and LED status indicator light, so the customer can monitor the working status that it improves product reliability and convenience to the customer.


The power supply can enter or exit arbitrarily under continuous power situation. It achieves online maintenance of the system and greatly saves installation and maintenance costs. Module maintenance and replacement will be simple and convenient, and system recovery takes only a few minutes.


Application of DC/DC Parallel Redundancy Module LIR-20


It can be widely used in smart buildings, communications, electricity, security, medical, industrial control, logistics, and other fields.



General application 1 (Inverter system):

(1) Connecting the 200W high voltage input PV200-29B24 power supply and 240W AC/DC power supply in parallel at the primary side.


(2) Using QA and QC692 IGBT driver in IGBT drive circuit.


MORNSUN DCDC Parallel Redundancy Module LIR-20.jpg


Key point:

Power supply at the primary side features high power, ultra-high input voltage range, 1500V safety design, and certification.  And it has a special potting process with high temperature and humidity resistance, cold and hot shocks, and dust pollution.

The power supply is redundantly connected in parallel at the primary side that can safely and reliably solve the consumption of high power in parallel.


General application 2 (industrial control):

(3) Two LI120-20B24 rail power supplies are used at the input side, and LIR-20 redundant module is used at the output.

MORNSUN DCDC Parallel Redundancy Module LIR-20.jpg

   DCS system, PLC system, a computer system with a high power requirement


Application circuit:


a, 1+1 Redundancy: Using one or more PSU as the redundant unit.


MORNSUN DCDC Parallel Redundancy Module LIR-20.jpg


b, Single Use: Connecting only one PSU to one LIR-2 module to reduce the stress of the diodes and improve the reliability.


MORNSUN DCDC Parallel Redundancy Module LIR-20.jpg


c, N+1 redundancy:multiple switching power supply redundancy to improve system stability


MORNSUN DCDC Parallel Redundancy Module LIR-20.jpg


Features of DC/DC Parallel Redundancy Module LIR-20


● Input voltage range: 22 - 60VDC

● Operating temperature range: -40℃ to +80℃

● Supporting for N+1 parallel redundancy

● DC OK function

● DIN-Rail Package(Applicable types EN50022: TS-35/7.5 or TS-35/15)

● Two input status indicators(Vin1、Vin2)

High efficiency up to 97%

MTBF>1000Khrs

Operating altitude up to 5000m

EN62368 safety approved, Meet IEC/UL62368, EN61558, EN60335



Please refer to the technical manual for specific product parameters:

Series Operating Temperature Efficiency(%) Dimension(mm) VINV Footprint & 3D Markings Datasheet Sample Buy
LIR-20 -40℃ to +80℃ 97 35.00*125.00*112.70 22 - 60VDC

* Вышеуказанные параметры продукта только для справки. Подробные технические параметры см. в даташит.

Series

0

Return
Return
Prompt
Пожалуйста, заполните поля правильно.

Проверка прошла успешно

This website uses cookies able to make your time on our site a lot less crummy and a much richer experience. For more information, please visit our Privacy Policy.

close
Privacy Policy

Контакты

close
MORNSUN distributors for part ""
Distributor Stock Qty  
NAC Group, Inc. 0 Buy online
Edge Electronics 0 Buy online
DigiKey Electronics - Buy online

Find the right contact in your region

Local distributorsContact us
close
  • File Name